Home > Products > Lensmate Lee Filter Holder Adapter
Lensmate Lee Filter Holder Adapter
Details below
In Stock
Price: $19.95
Now you can add ND, ND Grad, or any filter that fits the Lee filter holder (100mm wide) to the Lensmate G10 72mm lens adapter. There is no vignetting at any focal length.
(If you use the Lee 72mm WA adapter ring mounted on a low profile polarizer, you will get vignetting like the sample below at 28mm. To eliminate it, you must zoom to about 34mm. You can use the Lee 72mm WA adapter ring without a polarizer with no vignetting.) The Lensmate Lee filter holder adapter attaches to the Lee filter holder using slightly longer screws which replace the original ones. Once attached, the assembly snaps into the Lensmate G10B 72mm groove and is ready for use. With a 72mm low-profile polarizer attached to the lens adapter, all 3 slots are accessible for 100mm square/rectangular filters. To use, simply snap the holder into the groove of the Lensmate G10B 72mm lens adapter, add the polarizer, then the square filter(s), adjust and shoot. Directions: To attach the Lee filter holder to the Lensmate 72mm lens adapter: If you're combining a round filter (thread-on) with the Lee holder, attach the Lee holder to the lens adapter first before the round filter. With the Lensmate adapter resting against the back of the Lee filter holder, just push the holder into the groove of the Lensmate adapter until it pops in - that's it. (Hold onto the lens adapter for support while doing this to prevent stressing the lens barrel). 
